Decrease the requirement forgrinding and polishing.
Avert tiles frommoving while curing.
Re-usable wedges. save your money.
HOW TO USE?
Lay the first piece of brick, seam ≥2mm or above, and close to second bricks.
Implant the T-pin along the crack, then rotate it 90 degrees, clamp the T-pin at the bottom of the two bricks and tighten the adjusting cover so that the two bricks are in the same level.
Before the cement or tile glue has completely dried up (usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile, and remove the leveler.